3D eccentricity effects

Description

Manatee software allows to assess the effect of 3D eccentricities due to mechanical tolerances on the electromagnetic noise and vibrations levels.

Parallel and inclined static and dynamic eccentricity levels can specified at drive end and non drive end, as well as the position of the static eccentricity axis.

For a quick analysis, Manatee uses a perturbation technique of the airgap flux density to estimate parasitic magnetic forces induced by 3D eccentricities. This method can be applied when using a Magnetic Look Up Table, even when importing the airgap flux from a third party software.

Application

This features allows mechanical engineers to calcule the effect of 3D eccentricities on electromagnetic noise and vibrations. This way, too conservative values of mechanical tolerances can be avoided.

It also allows electrical engineers to perform robust e-NVH ranking of different electrical machines. An electrical machine A may be louder than machine B without eccentricity, while it becomes the opposite with 15% dynamic eccentricity.

It is recommended to model eccentricity effects when introducing a 3D FEA mechanical model in Manatee, including rotor and stator structures. Eccentricity induces parasitic Unbalanced Magnetic Pull resulting in additional structure-borne and air-borne noise.

Demonstration

See also